Cyanuric Acid Plant

Hangzhou Asia Chemical Equipment Co., Ltd. can provide a complete turnkey production plant for cyanuric acid. It offers customized engineering design, equipment manufacturing, installation and commissioning, as well as technical training services, helping customers obtain high-quality cyanuric acid products with a dry basis purity of ≥98.5%.

Product Introduction
Name: Cyanuric Acid Production Line (Isocyanuric Acid; Cyanuric Acid)
CAS No.: 108‑80‑5
Molecular Formula: C₃H₃N₃O₃
Molecular Weight: 129.07

Physical and chemical properties：White crystal, depolymerizing as cyanic acid and isocyanic acid under 330℃ temperature, pH value of saturated solution ≥4.0. Cyanuric acid separate out from water contains 2 molecules crystal water, relative density 1.768 (0℃), lost moisture in air then weathering; Cyanuric acid separate out from concentrated hydrochloric acid or sulfuric acid is anhydrous crystal. 1g TCCA can dissolve into about 200ml water, odour free, a little bitter.

Product Specifications Reference (Final Output)

Application of Cyanuric Acid Production Line Equipment

This complete set of production equipment uses urea as raw material to manufacture high‑purity cyanuric acid (isocyanuric acid, CAS 108‑80‑5) via pyrolysis, acid refining, crystallization, filtration, centrifugation and drying processes.

1. Produce key raw material for disinfectant manufacturing Generate qualified cyanuric acid as core feedstock for producing TCCA, SDIC and other chlorinated isocyanurate disinfectants for water treatment and swimming‑pool disinfection industries.
2. Manufacture pool chlorine stabilizer for direct sale Produce commercial‑grade cyanuric acid finished goods, widely used as chlorine stabilizer in swimming pools to reduce UV degradation of chlorine‑based disinfectants.
3. Supply intermediate for fine chemical industry Output industrial‑grade cyanuric acid for synthesis of cyanurates, cyanuric acid esters and triazine derivatives. These products serve as flame retardants, cross‑linking agents for plastics, coatings and resins, as well as pesticide intermediates.
4. Realize process circulation and environmental protection treatment Equipped with complete tail‑gas recovery system to recycle ammonia released during pyrolysis. Ammonia can be converted into ammonium sulfate by‑product, lowering waste gas emission to meet local environmental standards.

FAQ

Q1: What raw material is used for cyanuric acid production? 

A: Urea is the main feedstock. Through high‑temperature pyrolysis and deamination reaction, urea converts into crude cyanuric acid, then refined to reach 98.5% minimum purity.

Q2: Can your plant produce cyanuric acid for downstream TCCA manufacturing? 

A: Yes. Our production line is designed to output qualified cyanuric acid feedstock for producing TCCA, SDIC and other chlorinated isocyanurate disinfectant products.

Q3: Is ammonia gas generated during production? How to handle it? 

A: Ammonia is released in pyrolysis stage. We configure complete tail‑gas absorption system to recover ammonia for ammonium sulfate by‑product, complying with environmental‑protection standards.

Q4: Can you customize different capacity cyanuric acid plant? 

A: Yes. We design lines for small‑scale pilot plant up to large‑capacity industrial‑scale facilities. Send us your target capacity and site conditions, we will provide tailored process proposal.

Q5: What after‑sales support do you offer for the cyanuric acid plant? 

A: We provide equipment installation guidance, on‑site commissioning, formula & process training, spare‑parts supply and long‑term technical consultation.